Please make sure that your layers are fully dry between layers. If not, the tackiness may occur if the layers have not cured. The tacky feel should go away over time. On FAUX leather surfaces, it tends to stay longer. We recommend a very light sanding with a 1000+ grit. This will not compromise the texture or paint on your project.
Category: Finisher & 4-Coat Questions
Yes all 4-Coat sheens have been specially formulated to work in an airbrush. It will actually even heighten the gloss on the high gloss if applied by air brush
Yes, Acrylic Finisher and 4-Coat dries on as a clear coat.
Yes, Acrylic finisher is a scuff protectant but it is intended more for changing the sheen of leather articles. The more layers added the more layers of protection.
If you are looking for a stronger scuff protectant we suggest rdboutique 4-Coat.
>
Will Acrylic Finisher prevent the paint from cracking?
Acrylic Finisher works as a added layer of durability to prevent scratching not cracking. Keep in mind, if prep work wasn’t done correctly you are risking paint cracking and chipping. Always make sure to overdo prep of your items so that the products adhere properly.
In order to dull down a finisher a bit you can add Duller to the mix. 5% of duller is recommended amount to mix.
The dulling agent at the bottom can solidify when sitting on the Matte Acrylic Finisher so make sure to shake the bottle before using each time.
Acrylic Finisher is used after your project is completed and you wish to change the sheen of the project. Using the Acrylic Finisher is totally optional and is dependent upon personal preference. It is a mild scuff protectant. If looking for more protection please us Angelus 4-Coat.
Acrylic Finisher is a clear top coat that can help protect the paint from minor scuffs and scratches. Using Acrylic Finisher is also a great way to add a nice sheen to your project. We carry 4 different Acrylic Finisher’s which all offer a different amount of shine.
Shop Acrylic Finisher: https://take3print.com/product/angelus-acrylic-finishers/
Angelus Acrylic Finisher is intended for changing the sheen while applying mild scuff protection. Originally it was used for holsters and dipping leather items to give a final sheen to the article.
Angelus 4-COAT is a urethane based clear coat that is made for more scuff protection and for changing the sheen of the article as well.
You should use Angelus 4-Coat if you are looking for a more durable scuff resistant clear coat for your articles.
Shop Acrylic Finisher: https://take3print.com/product/angelus-acrylic-finishers/
Shop 4-Coat:https://take3print.com/product/angelus-acrylic-4-coat-finishers/